GreenWorks ST24B01 - Installing the Battery Pack; Removing the Battery Pack; Starting and Stopping the Trimmer

14
INSTALLING THE BATTERY PACK (See Figure 4.)
• Align raised ribs (2) on battery pack with grooves in the trimmer’s battery port.
• Make sure the latch on the back of the battery pack clicks into place and that battery pack is
fully seated and secure in the trimmer before beginning operation.
REMOVING THE BATTERY PACK (See Figure 4.)
• Depress the battery release button (1) in the back of the battery pack and pull battery pack out
of tool.
Fig. 4
1
2
STARTING AND STOPPING THE TRIMMER (See Figure 5.)
• Ensure a fully charged battery is installed into the string trimmer.
• To start the string trimmer, press and hold the safety lock button (1) and squeeze the trigger (2).
• To stop the string trimmer, release trigger to stop.
1
2
OPERATION
Fig. 5