GreenWorks ST40B01 - English; Table of Contents

1 Description.........................................4
1.1 Purpose.............................................................. 4
1.2 Overview........................................................... 4
2 Important safety instructions...........4
3 Symbols on the machine................... 5
4 Risk levels...........................................5
5 Service................................................ 6
6 Environmentally safe battery
disposal...............................................6
7 Proposition 65....................................6
8 Installation......................................... 6
8.1 Unpack the machine.......................................... 6
8.2 Attach the edge guide........................................ 7
8.3 Attach the guard.................................................7
8.4 Attach the auxiliary handle................................7
8.5 Install the battery pack.......................................7
8.6 Remove the battery pack................................... 7
9 Operation........................................... 7
9.1 Start the machine............................................... 7
9.2 Stop the machine............................................... 7
9.3 Adjust the length of the shaft.............................7
9.4 Change to the edging mode............................... 8
9.5 Operation tips.................................................... 8
9.6 Cutting tips........................................................ 8
9.7 Adjust the length of the cutting line.................. 8
9.8 Adjust the cutting diameter................................8
10 Maintenance.......................................8
10.1 General information...........................................8
10.2 Clean the machine............................................. 8
10.3 Replace the spool...............................................9
10.4 Replace the cutting line..................................... 9
11 Transportation and storage..............9
11.1 Store the machine.............................................. 9
12 Troubleshooting.................................9
13 Technical data..................................10
14 Limited warranty............................ 11
15 Exploded view..................................12
3
English
EN