GREER Company MICROGUARD 434 User Manual

MicroGuard
®
434/500 System — Troubleshooting Manual PN W453200 Rev C 08/01/00
GREER COMPANY 1918 E. Glenwood Place Santa Ana, CA 92705 Telephone: (714) 259-9702 FAX: (714) 259-7626
10 of 81
GREER COMPANY
GREER COMPANYGREER COMPANY
GREER COMPANY
Crane Systems
FAULT
CODE
Swing
Sensor
Boom
Angle
Sensor
Extension
Sensor
Tdx 1
Rod
Pressure
Tdx 0
Piston
Pressure
ACTION
000
NONE
001
X
002
X
Replace computer
003
X X
004
X Follow SECTION 6.4
005
X X
006
X X
Replace computer
007
X X X
008
X Follow SECTIONS 6.6 through 6.8
009
X X
010
X X
Replace computer
011
X X X
012
X X Follow SECTION 6.3
013
X X X
014
X X X
Replace computer
015
X X X X
No Fault Found
2.3.1 GROUP “A” FAULT CODES
GROUP “A” FAULT CODES REPRESENT FAULTS DETECTED FOR ANALOG SENSORS.
NOTE: CHECK AND REPAIR “B” AND “C” GROUP FAULTS BEFORE PROCEEDING WITH
GROUP "A" FAULT FINDING SENSORS,
The following chart details all the available codes in the left column and the actions to take
in the right column.
SECTION 2

GREER Company MICROGUARD 434 Specifications

General

Brand	GREER Company
Model	MICROGUARD 434
Category	Monitor
Language	English