Greiff TFEB 240 - User Manual

To Next Page

   Motala2016‐09‐15

  



MonteringsanvisningsprutboxMB/TF/TFE/TFB/TFEB

AssemblyandinstallationinstructionforsprayboothMB/TF/TFE/TFB/TFEB



 Figure1:TFEB240



Figure2:TFE240 Figure3:TFB240  Figure4:MB300

Need help?

Do you have a question about the Greiff TFEB 240 and is the answer not in the manual?

Summary

Overview of distinct filter configurations for spray booths, illustrated with figures.

Crucial advice before starting, including reading instructions, parts, screw/washer usage, and edge lath installation.

Marking the booth location and erecting the first inner walls.

Assembling the suction chamber and filter pillars to side walls.

Detailed diagrams for CI-FF and AF-FF filter frame construction.

Creating a roof opening and attaching the take-off or transition piece.

Final mounting of frame profiles for TF/TFE filter walls.

Assembling remaining walls, roof, and front panels for TFB/TFEB.

Measuring, drilling, and mounting light fittings in the TFEB roof.

Assembling remaining parts and installing light fittings in MB/TFB housing.

Bolting the spray booth to the ground using pre-drilled pilot holes.

Connecting to electrical ground, ventilation, and installing filters.

General