4.3 Headrest adjustment
The headrest (4) can be adjusted in height simply by pulling it out or pushing it in. The adjustment is noticeably
engaging in 4 positions (11). The headrest can be tilted continuously. The possible tilt range is limited by stops.
No tilt adjustment on Retro model.
Removing the headrest on Traveller, Touring, Vario, Vario XXL and Retro models
On the Traveller, Touring, Vario, Vario XXL and Retro models, the cotter pin (12) must be pressed right in the
direction of travel to remove the headrest. To do this, carefully insert your hand between back upholstery and
side bolster and feel the cotter pin. The cotter pin releases the lock when sufficiently twisted.
Removing the headrest on the Sportline model
On the Sportline model, the cotter pin must also be pressed right in the direction of travel to remove the head-
rest. To do this, feel the round release button (13) on the rear side. The cotter pin releases the lock when suffi-
ciently twisted.
12. Cotter pin
(Traveller, Touring, Vario, Vario XXL and Retro)
13. Release button
(Sportline)
To Next Page
Loading...