GridConnect NET485 - Disclaimer and Revisions

Disclaimer and Revisions
Operation of this equipment in a residential area is likely to cause interference in which case the user, at his
or her own expense, will be required to take whatever measures may be required to correct the interference.
Attention: This product has been designed to comply with the limits for a Class B digital device pursuant to
Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with this guide, may cause harmful interference to radio
communications.
Changes or modifications to this device not explicitly approved by Grid Connect will void the user's
authority to operate this device.
The information in this guide may change without notice. The manufacturer assumes no responsibility for
any errors that may appear in this guide.
Date
Rev.
Author
Comments
03/21/05
A
GR
Preliminary Release
04/26/06
B
GR
Addition of 485/422 Option Jumper
05/23/06
C
GR
Release of Firmware 6.1.0.2 and Device Installer
4.1.0.3
07/06/10
D
GR
Add 422/485 wiring drawings
10/10/13
E
GR
xPort-05 (6.9.0.2) Release and Device Installer
4.4.0.0