Telephonics Corporation
R ADAR SYSTEMS D IVISION
TM113806 (3/10) 1-7
EQUIPMENT
TYPE NUMBER
TELEPHONICS
PART NUMBER
DESCRIPTION
IN-1702B 364-1000-0009 The radar display has a 9 inches diagonal LCD display. This display has 18 soft keys
that control all radar functions. When a softkey is pressed, data is sent on the ARINC
429 data bus to the Interface Unit for command input. The Brightness Dimmer bus
shall have a voltage input from 0 to 5 Volts. A Rotary Switch on the front panel shall
provide the following selections: Power Off, Radar, and FLIR. The display shall also
have a Joystick input port to accept data from an external joystick (JS-1709A).
IN-1702A 364-1000-015 The radar display has a 15 inches diagonal LCD display. This display has 18 soft
keys that control all radar functions. When a softkey is pressed, data is sent on the
ARINC 429 data bus to the Interface Unit for command input. The Brightness
Dimmer bus shall have a voltage input from 0 to 5 Volts. A Rotary Switch on the
front panel shall provide the following selections: Power Off, Radar, and FLIR. The
display shall also have a Joystick input port to accept data from an external joystick
(JS-1709A).
AA-1504A 4001943-0401
39-inch x 9-inch flat-plate phased array with 2.6° azimuth beamwidth and 10.5°
elevation beamwidth.
AA-1504A 4001943-0403
29-inch x 9-inch flat-plate phased array with 3.4° azimuth beamwidth and 10.5°
elevation beamwidth.
AA-1504A 4001943-0404
33-inch x 9-inch flat-plate phased array with 3.2° azimuth beamwidth and 10.5°
elevation beamwidth.
IU-1507B 364-2000-001 Interface unit provides the interface between the aircraft and the radar system and
between the various system LRUs. Processes the digitized video output from the R-T
and supplies red, green and blue data in digital form to the multifunction indicator.
Also supplies sync pulses to the indicator, drive signals to the antenna drive unit, and
PRF and mode selection signals to the R-T. Allows addition of second indicator to
system without modification.
MT-1508A 3614258-0801 Interface unit mounting tray mounts IU-1707A.
3614258-0802 Same as –0801 except it has vibration isolators.
MT-1501A 2040401-0501 R-T unit mounting tray mounts RT-1501A.
2040401-0502 Same as –0501 except it has vibration isolators
1.3 ADDITIONAL EQUIPMENT REQUIRED FOR COMPLETE INSTALLATION
1.3.1 Unit Installation Connectors
Install Kit Part Number: 364-1034-002
Table 1.3.1-1
Connector Part Numbers
UNIT MODEL NAME TELEPHONICS P/N MANUFACTURERS P/N
DA-1503B Connector
J1001 24240-0158 MS-3120F-20-39S
4 Hex Socket Head Screw 46068-0808S 8-32 x ½ inch, Stainless Steel
4 Lock Washer 36037-3406 Screw Size 8, Corrosion Resistance Steel
RT-1501A Connector
J2001 24240-0123 MS-3126F-18-32S(SR)
The document reference is online, please check the correspondence between the online documentation and the printed version.
To Next Page
Loading...