Need help?Do you have a question about the Grillo Climber 9.16 and is the answer not in the manual?
General| Transmission | Hydrostatic |
|---|---|
| Blades | 1 |
| Engine | Briggs & Stratton |
| Engine Type | 4-stroke |
| Starting | electric |
| Wheel Size | Front 16x6.50-8, Rear 20x10.00-8 |
Essential instructions for safe operation and accident prevention.
Warning about operating on slopes exceeding 17° (30%).
Information on machine serial number and identification labels.
Guidance on obtaining support and information for operations not covered.
Recommendations for using original spare parts and ordering procedures.
Information on warranty terms and conditions.
Pre-operation checks and initial setup procedures.
Safety precautions related to the machine's battery.
Initial engine and transmission break-in procedures and maintenance.
How to adjust the cutting plate for different grass heights.
Safe mowing practices on inclines and use of differential lock.
Understanding when the engine safety features will stop the machine.
Procedures for engine oil changes, filter checks, and lubrication.
Instructions for checking and changing gearbox oil.
Procedures for checking hydraulic motor oil levels and cleaning.
Recommended tyre pressures for optimal performance.
Guidelines for checking and maintaining the air filter.
How to inspect, sharpen, and balance the cutting blades.
Steps to ensure the cutting plate is level for an even cut.
Information on the self-adjusting blade belt system.
How to regulate the tension of the hydrostatic transmission belt.
Operating the blade engagement clutch and safety disengagement.
Procedures for replacing vee-belts, requiring professional assistance.
How to use the lever for towing or manual movement.
Troubleshooting common electrical system faults and fuse replacement.
Addressing issues like machine not staying in neutral or incorrect PTO engagement.
Procedures for stopping the machine and routine cleaning after use.
Guidelines for storing the machine for extended periods.
To Next Page