Need help?Do you have a question about the Grillo CLIMBER 8.22 and is the answer not in the manual?
General| Brand | Grillo |
|---|---|
| Model | CLIMBER 8.22 |
| Category | Lawn Mower |
| Language | English |
Explains common safety symbols and their meanings.
Covers safe practices for maintenance, fire prevention, and PPE use.
Warnings about hot engine parts, exhaust fumes, and moving components.
Warning regarding tire burst hazards and associated risks.
Precautions for battery handling and flammable fuel.
Warnings about rotating blades, battery acid, and machine tipping.
Warning against operating on steep slopes exceeding 17 degrees.
Caution about sharp components and potential object ejection.
Diagram showing key controls and their labels.
Visual guide to lubrication points on the machine.
Explains the kit's purpose and components for blade fixing.
Step-by-step guide for fitting washers and tightening the nut.
Comprehensive list of safety warnings and precautions for operation.
Defines the machine's purpose and general description.
Lists prohibited uses and additional safety recommendations.
Information on machine serial number, spare parts, and technical support.
List of essential spare parts recommended for stocking.
Details engine, drivetrain, dimensions, speed, and capabilities.
Steps for checking transport damage, fluid levels, and assembly.
Procedures for engine break-in, oil changes, and pre-start checks.
Guide for starting the engine, headlamp operation, and beginning work.
Explains use of travel lever, brakes, differential lock, and hour meter.
Tips for optimal mower performance and longevity.
How to set the cutting deck to various heights.
Guidance for mowing on inclines, considering stability and obstacles.
Explains conditions under which the engine will stop for safety.
Safety rules for maintenance and environmental protection.
Procedures for engine oil, air filter, and hydrostatic axle maintenance.
Covers checks, adjustments, and replacement of blades, deck, and belts.
Details lubrication points and adjustments for differential lock and lever.
Visual guide illustrating lubrication points with numbers.
Table detailing maintenance procedures and their intervals.
Remedies for dashboard off, no power, and starter motor not turning.
Solutions for difficult starting, carburetion, and no petrol flow.
Addresses drop in performance and speed too high for cutting height.
Troubleshooting for uneven cutting and operational vibrations.
Guidance on fuse replacement, electrical issues, and neutral position adjustment.
Procedures for stopping the machine, cleaning, and storage.
Diagrams of the control panel, engine, axle, and filter.
Illustrations for blade assembly, deck, belts, brakes, and lubrication.
Guidelines for safely transporting the machine on vehicles.
Declaration of compliance with relevant EC directives and standards.
Reports measured sound power and vibration levels according to standards.
To Next Page