EasyManuals Logo

Grimm ENVIRON CHECK 180 User Manual

Default Icon
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Manual EDM 180
Revision 1.0 29.03.2010 Page 10/61
All stickers shown are on the bottom of the instrument and warn the operator for laser light radiation in
case the covers of the instrument have been dismounted!
Laser class 1 in closed state of the measurement unit! Laser of class 1 are not dangerous and safe for
eyes even in case of malfunction due to manipulation or usage of optical additives (e.g. binocular,
microscope etc.)
The glass fuses built in the instrument (Pico fuse 2A, quick-type, and switching capacity 300A /32V DC)
must only be replaced by trained service staff with the type specified in the circuit documents. Because
the devices are secured by electronically excess-current cut-out the fuse will only respond at a severe
malfunction
.
2.4 Transportation
The instrument may be transported only in the original packing and in the switched off mode. The aerosol
inlet and output have to be closed with provided covers.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grimm ENVIRON CHECK 180 and is the answer not in the manual?

Grimm ENVIRON CHECK 180 Specifications

General IconGeneral
BrandGrimm
ModelENVIRON CHECK 180
CategoryLaboratory Equipment
LanguageEnglish