www.ebikes.ca/satiator
info@ebikes.ca
+1(604) 569-0902
- 3 -
Congratulations on acquiring a Cycle Satiator universal charger, for use with all kinds of 24-48V
nominal battery packs. We hope that this one device serves you and your batteries for years to
come.
1. Basic Overview
The Satiator was designed with a compact and narrow form factor so that it could be used either
as a portable stand-alone charger, or mounted to the frame of your bike/vehicle as an onboard
charger. It has an AC input power port on the side, (100-240V AC), a DC output cable to
connect the charger to the battery, a graphical display screen for showing the current charging
status, and a pair of buttons to navigate the charger menu.
Figure 1: Satiator Model and Features
While most battery chargers are limited to charging one specific battery type and voltage, the
Satiator is programmable so that you can choose between a number of battery charge
behaviours. You could use it to charge a 24V lead acid pack one day, and a 48V lithium ebike
battery the next.
This adjustability is useful. It means a separate charger is no longer needed for each of your
batteries, and when you upgrade to a new pack, the Satiator can be configured to match it even
if the voltage and chemistry are different. It also allows you to select between rapid charge rates
for top-up convenience and conservative overnight charging to maximize battery life.
To Next Page
Loading...