Need help?Do you have a question about the Grizzly G5954 and is the answer not in the manual?
General| Motor Power | 2 HP |
|---|---|
| Width | 24 inches |
| Inlet Diameter | 6 inches |
| Impeller Diameter | 12 inches |
| Filter Type | Canister |
Welcome message, manual overview, and contact details for Grizzly Industrial.
Details dimensions, electrical requirements, motor specs, and basic operation metrics.
Information on bag capacity, impeller, materials, and key operational features.
Graphical and tabular data illustrating the dust collector's performance characteristics.
Essential guidelines for safe operation, including PPE and hazard awareness.
Rules for trained personnel, work area management, maintenance, and safe operation practices.
Important safety warnings and usage guidelines specifically for dust collectors.
Details amperage draw, circuit needs, and crucial grounding procedures for 220V connections.
List of all parts and hardware required for assembling the G5954 dust collector.
Guidelines for cleaning the unit and choosing an operational location with adequate space.
Instructions for assembling the base, mounting the motor/fan, and attaching the collector unit.
Step-by-step guide for properly fitting and securing the upper and lower collection bags.
Safety warnings for operation, general use overview, and system planning introduction.
Information on choosing appropriate ducting materials like metal, flexible, and plastic.
Comparison of metal, flexible, and plastic ducting, including recommendations and warnings.
Steps for designing a dust collection system, including shop layout and duct routing principles.
Guide to calculating required airflow (CFM) for machines and estimating duct sizes.
Methods for sizing duct lines and answers to common questions about branch line configurations.
Procedure for calculating duct resistance and static pressure loss in the system.
Instructions for grounding ductwork to prevent static buildup, arcing, and potential explosions.
Details on starter kits, straight pipes, flex hose, reducers, and elbows for duct systems.
Visual guide to the switch wiring and junction box connections on the G5954 dust collector.
Detailed wiring diagram for the 5HP, 220V single-phase motor and control components.
Diagram showing the dust collector's parts with numerical references for easy identification.
A list of all parts, their reference numbers, and descriptions for ordering replacements.
Information on the 1-year warranty, exclusions, and procedures for returning products.
To Next Page
