To Next PageTo Next Page
Need help?Do you have a question about the Grizzly g0703 and is the answer not in the manual?
General| Motor | 1 HP |
|---|---|
| Airflow Capacity | 650 CFM |
| Collection Bag Capacity | 30 gallons |
| Inlet Diameter | 4" |
| Air Flow (CFM) | 650 CFM |
| Filter Type | Felt Bag |
| Dust Bin Capacity (gal.) | 30 gallons |
| Width (in.) | 18 inches |
| Depth (in.) | 33-1/2" |
Discusses potential inaccuracies in the manual and how to get updates.
Provides contact details for Grizzly Technical Support and Documentation Manager.
Describes the G0703/G0703P as a 2-stage cyclone dust collector with remote control.
Essential safety guidelines for operating the machine safely, including eye protection and hazardous dust awareness.
Specifies intended use and prohibits hazardous materials.
Warns about dust health risks and recommends respirator use.
Covers risks from ignition sources, sparks, and static electricity.
Warns about keeping hands away from the impeller.
Lists electrical requirements for 110V operation.
Explains full-load current and provides ratings for 110V and 220V.
Lists electrical requirements for 220V operation.
Explains the necessity of grounding for electrical safety.
Details the process and parts needed to convert the machine to 220V.
Advises against extension cords and provides guidelines if necessary.
Lists items required to complete the setup process.
Instructions for unpacking and inspecting the machine for damage.
Lists parts included in machine and stand packaging.
Covers physical environment, electrical installation, and lighting needs for safe operation.
Discusses space allocation and ensuring the surface can bear the machine's weight.
Steps for safely connecting and disconnecting the machine from power.
Covers general design, tips, and duct material considerations.
Details plastic duct advantages, disadvantages, and grounding requirements.
Compares metal duct advantages with flexible duct types and recommendations.
Outlines steps for designing a dust collection system: planning, layout, duct layout.
Covers determining duct sizes and CFM needs for machines.
Discusses planning drop downs for each machine with blast gates.
Explains sizing branch lines for machines with multiple ports.
Details how duct work components affect airflow resistance.
Lists factors affecting static pressure and an example materials list.
Explains how the cyclone dust collector works and its airflow path.
Instructions on how to reprogram the remote receiver.
Step-by-step guide for removing and cleaning the canister filter.
Outlines maintenance schedule and filter cleaning procedures.
Provides guidance on when and how to empty the collection drum.
Lists common symptoms, causes, and solutions for motor/electrical issues.
Details common motor and electrical problems and their fixes.
Troubleshoots noise, vibration, and poor dust collection.
Crucial safety guidelines for performing electrical wiring tasks.
Identifies the physical locations of key electrical components.
Illustrates the wiring connections for 110V operation.
Illustrates the wiring connections for 220V operation.
Exploded view diagram of the G0703 model parts.
Comprehensive list of parts for the G0703 model with references.
Exploded view diagram of the G0703P model parts.
Identifies the location and purpose of various labels on the machine.
