To Next Page
H
hburnsJul 26, 2025
What to do if my Grizzly Dust Collector doesn't start or the breaker trips?
- CcrystalcastilloJul 26, 2025
If your Grizzly Dust Collector doesn't start or the breaker trips, several issues could be the cause. First, check if the disabling key is installed. Next, ensure the wall fuse or circuit breaker isn't blown or tripped, and that the circuit size is suitable. Also, confirm the power supply is switched ON and has the correct voltage. Inspect the wiring for breaks or corrosion and repair or replace as needed. The motor ON/OFF switch or the motor itself might be faulty and need replacement or repair.
General
