Test Run
TroubleshootingPage 40
To test run your dust collection system:
1.
2.
3. Power SupplyPage 10
If using a 20-amp, 110-volt power supply
circuit, the machine may cause the power
supply circuit breaker to trip. If this occurs,
you must install the included 6" x 5" inlet
restrictor to lower the motor load and cur-
rent draw.
NOTICE
4. Figure 30
5.
ON
OFF
6.
OFF
Troubleshooting
Page 40
Troubleshooting
7.
8.
Step 7
9. OFF
Figure 30.