3
Call 1-800/676-9040 for Technical Support
1
INTRODUCTION
1.6.4 Recommended Supplies
• Pipe Thread Compound: Brand: LACO PipeTite Stik
No. 11176 or equivalent
• Motor Sealant Grease: Bel-Ray
• 2” Aluminum Duct Tape
• Removable Thread Locker:
Locktite Type 242 (Door)
Locktite Type 222 (Exterior)
• Clear Silicone Sealant:
Dow Coming Type 732
• Silicone Heat Sink Compound:
Non-Fluid Oil Corp., Chemplex 1381
• High Temperature Anti-Seize and Lubricating Compound
Bostix NEVER SEEZ NSBT-16
1.7 How To Use This Manual
Read this manual completely before attempting any disassembly
or repairs.
Please note the similarities and differences between the various
models described in the manual.
Before making repairs, you should have knowledge of the
steamer operation as described in the Operations Section of this
manual, and a good understanding of service techniques, as
presented by the Groen Service School.
This service manual should be taken with you on all service calls.
Use the correct tools in accordance with the procedures shown
and use only Groen Certified Replacement Parts when performing
steamer repairs.
1.7.1 Technical Bulletins
Technical bulletins are issued by Groen to provide additional and
specific technical information to this manual. The technical
Bulletin Section of this manual should be used to file all of the
Technical Bulletins sent to you from the factory.
When you receive a Technical Bulletin, insert the bulletin in the
Technical Bulletin Section of this manual, and write a note in the
margin of the page in this manual which is appropriate to the
subject covered by the bulletin.
To Next Page
Loading...
Need help?
General
