Amplifier
Owner’s manual
PLUTONIUM
GZPA 1.8000 SPL-HC
Please read before installation
Thank you for selecting a
GROUND ZERO
Plutonium amplifier.
We are providing a helpful hints list which should keep you from experiencing
unnecessary shut down
Introduction Class-D Amplifier
Due to their state- of- the- art technology and high efficiency, these Class-D mono amplifiers help your system to
provide an impressive sound experience. The modern circuit technology of the power supply and the signal
processing allows achieving maximum performance levels from the provided power.
Due to the different filters and circuits a very high power output is achieved, therefore these amplifiers are made
for low frequency information (Subwoofer). They can not be used for high- and midrange speakers.
The link mode enables to use to full power of two amplifiers for one speaker. This is first of all advantageous for a
really powerful and lively music playback.
Features
• High current amplifiers for maximum power at low current
• Class-D Design for high efficiency
• Efficiency >86%
• Damping factory >200 at 4Ω
• Operation voltage: DC 10V ~16V Input
• 1 Ω stable (Linkmode 2Ω)
• Dual MOSFET PWM power supply
• Power and Protection indicator
• Variable lowpass
• Variable subsonic filter
• 180° variable Phase Shift
• Aluminum heat sink
• RCA Inputs / Output
• Bassremote control
• +9dB Bassboost
• 2 x 50mm² Battery/Ground terminals
To Next Page
Loading...
Need help?
General
