GPS: SAVE - WAYPOINT
- Press to enter “GPS” Mode which defaults to the Save/Waypoint List
- Press to move Up and Down the Save/Waypoint List
SAVE: Press on Save
Press to move between letters
Press to change selected letter
Press to Save and you will see on the display “Save Ok” and then
returned to Save/Waypoint options or press to cancel the current
settings and return the Save options
You will then be returned to Save/Waypoint options
Waypoint: Press on a saved Location to activate GPS function
Press to the saved waypoint you would like to go to
On selected waypoint press and it will show you the Yard metter
that tells you how far it is to the desired location
To delete a waypoint press, hold down the button for 3 seconds to
Delete selected location
Press to switch to another Waypoint
- Press the button to exit out of the “GPS” Mode or press the “POWER” button to turn it
o.
15 16
HOW IT WORKS
Notch Settings
- Press to enter custom mode to detect the metal of your choosing
*It will be set to whatever was selected last
- Press to detect all metals
- Press to detect only those metals found in jewelry
- Press to detect only those metals found in coins
- Press to deselect certain metals to customize detecting
- To save changes wait for 2-3 sec or press the button
LED Light
- Press to turn the light on.
- Press again to turn the light o.
To Next Page
Loading...
Need help?
General