GroundEFX Stryker Lite MX300 User Manual

13 14
HOW IT WORKS
LEFT ARROW Button
DOWN ARROW Button
POWER Button
RIGHT ARROW
Button
UP ARROW Button
Ground Grab
- Press to enter “Ground Grab” Mode
Discrimination
- Press to enter “Discrimination” Mode
- Press to eliminate metal starting
from left to right 10-99
- Press or wait for 2-3 seconds to detect in
current settings
(This mode uses your last Settings to detect)
Pin Point
- Hold the trigger down to enter “Pin Point”
Mode
Settings
- Press “VOL” to change volume setting
- Press while Volume is selected to
change Volume
- To save changes wait for 2-3 sec or press
the button
- Press “SENS” to change Sensitivity setting
- While Sensitivity is selected press
to change Sensitivity
- To save changes wait for 2-3 sec or press
the button
SAVE and
ENTER Button
DELETE Button
GPS Button
GROUND
GRAB
Button
DISCRIMINATION
Button
NOTCH Button
LIGHT Button
SENSITIVITY
Button
VOLUME Button
COIN Mode Button
JEWELRY
Mode Button
ALL METAL
Mode Button
CUSTOM
Mode Button’s
PINPOINT
Trigger

GroundEFX Stryker Lite MX300 Specifications

General

Brand	GroundEFX
Model	Stryker Lite MX300
Category	Metal Detector
Language	English