Need help?Do you have a question about the Grouw! 18070 and is the answer not in the manual?
Read through this manual and enclosed safety instructions before use and save them for future reference.
The lawnmower is supplied without engine oil. Fill with 0.6 litres of engine oil suitable for garden machinery before starting.
Always wear protective glasses, work trousers and safety shoes. Use ear protectors. Keep people and animals away.
Switch off engine before adjustments. Remove objects from grass. Avoid wet grass, slopes, and tripping hazards.
Ensure proper skirt clearance. Be aware of blade stopping time after engine cutoff. Handle blade with caution.
Use unleaded petrol only. Refuel in ventilated area, cool engine first, store fuel safely, avoid heat sources.
Dispose of fuel, oil, and used filters according to local authority rules for environmental compliance.
Screw handlebar parts securely, unfold and fix upper section, and attach cable clips for proper routing.
Press safety handle, pull starter handle out, and insert cord into handlebar eye for correct operation.
Pull height adjustment knob and move to required angle, ensuring it engages in one of the 5 positions.
Open lock mechanism, lift spring-loaded flap, and fit side discharge into opening for grass ejection.
Lift spring-loaded flap, remove side discharge, and lower flap to close opening for mulching function.
Remove fuel cap, fill with 95 octane petrol, wipe spills, replace cap, and check for leaks.
Push throttle to START. Pull safety handle and starter handle until resistance, then pull hard.
Cut evenly with overlap. Slow down or raise height if grass tufts appear. Ensure visibility and care on slopes.
Stop engine before moving over gravel, flagstones, paving stones, or asphalt surfaces to prevent damage.
Wipe plastic/painted parts with damp cloth. Lubricate all moving parts with acid-free oil or spray.
Tilt mower (max 45°), remove spark plug cap, rinse underside. Use washing connector for mulch function cleaning.
Remove spark plug cap, bolt, and washer to detach blade. Caution: blade is sharp; consider professional sharpening.
Ensure blade balance after sharpening. Replace damaged blades, lubricate, and reassemble securely with correct torque.
Check oil level on flat surface using dipstick. Ensure it is between Min and Max marks. Refill if necessary.
Change oil after 20/50 hours or season start. Drain old oil, refill with 0.6L engine oil, and retighten plug.
Clean filter element in hot water with detergent. Dry fully, drip SAE30 oil, squeeze excess, and wipe cover.
Regularly lubricate safety control and clutch handles using acid-free oil or lubricating spray.
Check spark plug every 10 hours. Clean or replace if sooty. Check and adjust spark gap to 0.6-0.7 mm.
Empty fuel tank and run engine dry. Loosen carburettor screw to drain remaining petrol. Add oil to spark plug opening.
Clean lawnmower, lubricate metal parts, fold handlebar, and store in a clean, dry, frost-free location.
Quote product model number for all inquiries: Complaints, parts, returns, or guarantee issues. Visit www.schou.com.
Manufacturer declares compliance with relevant standards (EN ISO 5395, 14982) and directives (Machinery, EMC).
Read through this manual and enclosed safety instructions before use and save them for future reference.
The lawnmower is supplied without engine oil. Fill with 0.6 litres of engine oil suitable for garden machinery before starting.
Always wear protective glasses, work trousers and safety shoes. Use ear protectors. Keep people and animals away.
Switch off engine before adjustments. Remove objects from grass. Avoid wet grass, slopes, and tripping hazards.
Ensure proper skirt clearance. Be aware of blade stopping time after engine cutoff. Handle blade with caution.
Use unleaded petrol only. Refuel in ventilated area, cool engine first, store fuel safely, avoid heat sources.
Dispose of fuel, oil, and used filters according to local authority rules for environmental compliance.
Screw handlebar parts securely, unfold and fix upper section, and attach cable clips for proper routing.
Press safety handle, pull starter handle out, and insert cord into handlebar eye for correct operation.
Pull height adjustment knob and move to required angle, ensuring it engages in one of the 5 positions.
Open lock mechanism, lift spring-loaded flap, and fit side discharge into opening for grass ejection.
Lift spring-loaded flap, remove side discharge, and lower flap to close opening for mulching function.
Remove fuel cap, fill with 95 octane petrol, wipe spills, replace cap, and check for leaks.
Push throttle to START. Pull safety handle and starter handle until resistance, then pull hard.
Cut evenly with overlap. Slow down or raise height if grass tufts appear. Ensure visibility and care on slopes.
Stop engine before moving over gravel, flagstones, paving stones, or asphalt surfaces to prevent damage.
Wipe plastic/painted parts with damp cloth. Lubricate all moving parts with acid-free oil or spray.
Tilt mower (max 45°), remove spark plug cap, rinse underside. Use washing connector for mulch function cleaning.
Remove spark plug cap, bolt, and washer to detach blade. Caution: blade is sharp; consider professional sharpening.
Ensure blade balance after sharpening. Replace damaged blades, lubricate, and reassemble securely with correct torque.
Check oil level on flat surface using dipstick. Ensure it is between Min and Max marks. Refill if necessary.
Change oil after 20/50 hours or season start. Drain old oil, refill with 0.6L engine oil, and retighten plug.
Clean filter element in hot water with detergent. Dry fully, drip SAE30 oil, squeeze excess, and wipe cover.
Regularly lubricate safety control and clutch handles using acid-free oil or lubricating spray.
Check spark plug every 10 hours. Clean or replace if sooty. Check and adjust spark gap to 0.6-0.7 mm.
Empty fuel tank and run engine dry. Loosen carburettor screw to drain remaining petrol. Add oil to spark plug opening.
Clean lawnmower, lubricate metal parts, fold handlebar, and store in a clean, dry, frost-free location.
Quote product model number for all inquiries: Complaints, parts, returns, or guarantee issues. Visit www.schou.com.
Manufacturer declares compliance with relevant standards (EN ISO 5395, 14982) and directives (Machinery, EMC).
General| Brand | Grouw! |
|---|---|
| Model | 18070 |
| Category | Lawn Mower |
| Language | English |
To Next Page
