EasyManua.ls Logo

Grouw! 17940 - User Manual

Grouw! 17940
55 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Original brugsanvisning
Original bruksanvisning
Originalbruksanvisning
Alkuperäinen käyttöohje
Original instructions
Original-Gebrauchsanweisung
DK
NO
SE
FI
GB
DE
Model 17940

Other manuals for Grouw! 17940

Questions and Answers

  • T
    Terri VangAug 15, 2025
    What to do if my Grouw! Lawn Mower is stuck?
    • M
      Michael NelsonAug 15, 2025
      If your Grouw! Lawn Mower is stuck, try these steps: First, press the OK button to restart it. Next, check that the boundary cable is correctly laid out. Finally, make sure there are no obstacles like branches restricting its movement.
  • M
    munozzacharyAug 19, 2025
    How to fix boundary cable signal error on Grouw! 17940?
    • M
      Matthew JonesAug 19, 2025
      If you're encountering a boundary cable signal error with your Grouw! Lawn Mower, check that the mower is within the work area. Then, inspect the indicator light on the charging station. Correct any identified errors. If needed, remove the boundary cable ends from the charging station and measure the cable's resistance using a multimeter. Correct the error or replace the boundary cable if necessary.
  • M
    mfischerAug 22, 2025
    Why is my Grouw! Lawn Mower showing a charging error?
    • Y
      yvettewillisAug 22, 2025
      If you're experiencing a charging error with your Grouw! Lawn Mower, first, check that the charging poles are clean and correctly inserted into the charging socket on the robot lawnmower. If the issue persists, perform manual charging.
  • R
    Regina LeonardAug 26, 2025
    What to do if my Grouw! 17940 is overloaded?
    • D
      Dr. William HarrisAug 26, 2025
      If your Grouw! Lawn Mower has been overloaded, cut the grass with a regular lawnmower and clean the robot lawnmower. Then, press the OK button to restart the Grouw! Lawn Mower.
  • K
    Kim BensonAug 28, 2025
    Why is my Grouw! 17940 Lawn Mower so noisy?
    • D
      David LoganAug 28, 2025
      If your Grouw! Lawn Mower is very noisy, try the following: 1. Change all the blades and screws at the same time. 2. Remove any foreign objects (ropes, plastic, tape, etc.) from the blades. If the problem persists, the Grouw! Lawn Mower must be inspected by a professional.
  • D
    Daniel HamiltonAug 31, 2025
    What to do if my Grouw! 17940 Lawn Mower rolls over?
    • P
      Patrick LoweryAug 31, 2025
      If your Grouw! Lawn Mower has rolled over, reposition it and press the OK button to start it again. To prevent this from happening again, change the layout of the boundary cable to avoid the slope.
  • B
    Brenda CraigSep 4, 2025
    How do I fix a skirt error on my Grouw! 17940?
    • J
      Joshua SolomonSep 4, 2025
      If you are getting a skirt error on your Grouw! Lawn Mower, remove any pieces of metal. Then, press the OK button to restart the robot lawnmower.
  • F
    Frank BurtonSep 7, 2025
    What to do if there is an obstruction on the Grouw! 17940 Lawn Mower boundary cable?
    • W
      wileyjohnSep 7, 2025
      If there is an obstruction on the boundary cable of your Grouw! Lawn Mower, remove the obstruction. Then, press the OK button to restart the robot lawnmower.
  • C
    Craig CastroSep 12, 2025
    Why does my Grouw! 17940 run in circles?
    • D
      Daniel MahoneySep 12, 2025
      If your Grouw! Lawn Mower runs in circles along the boundary cable, move the boundary cable.

Summary

INSTRUCTIONS

Introduction

Read through the accompanying documentation before use and save it for later reference.

Tip!

Install the robot lawnmower in your garden and fully charge it before starting use.

Main components

Identifies and lists the key components of the robot lawnmower and its accessories.

Control panel overview

Power and status indicators

Covers the POWER button, work time LEDs, on/locked LED, battery status, and error indicators.

Operation and setting buttons

Details the functions of SET WORK TIME, START, HOME, LOCK, and OK buttons.

Robot lawnmower operation

Starting, stopping, and returning to base

Step-by-step guide for starting, stopping, and manually returning the robot lawnmower to its charging station.

Setting work times and boundary cut

Guides on configuring daily work hours, start times, and the automatic boundary cut feature.

Advanced functions and updates

PIN code security and firmware updates

Instructions for changing the PIN code for security and updating the robot's firmware via USB.

Rain sensor operation

Explains the role of the rain sensor in pausing mowing and the robot's behavior during rainy conditions.

Troubleshooting and error messages

Error indicator light guide

Lists faults corresponding to red, blue, and flashing error indicator lights on the robot lawnmower.

Lifted, stuck, skirt, and boundary errors

Details specific errors like lifted, stuck, skirt issues, and boundary cable signal problems.

Error handling and charging

Battery temperature and charging errors

Addresses abnormal battery temperatures, charging errors, and the need for manual charging.

Manual charging procedure and PCB overheating

Provides a step-by-step guide for manual charging and explains PCB overheating errors.

Further troubleshooting

Rollover, overload, and obstruction issues

Covers errors related to the robot rolling over, motor overload, and obstructions on the boundary cable.

Operation and noise troubleshooting

Addresses issues like failure to reach the station, running in circles, noise, and non-functional LEDs.

Cleaning and maintenance

Routine cleaning and blade care

Details cleaning procedures for the robot, charging station, and care for the cutting blades.

Battery maintenance and winter storage

Covers maintenance-free battery care and instructions for storing the robot during winter.

Service and warranty information

Service centre and guarantee terms

Provides contact details for service inquiries and outlines the conditions that void the product guarantee.

EC Declaration and environmental compliance

Includes regulatory conformity declarations and information on the proper disposal of electrical waste.

Grouw! 17940 Specifications

General IconGeneral
BrandGrouw!
Model17940
CategoryLawn Mower
LanguageEnglish

Related product manuals