What to do if Grouw! 17935 Lawn Mower is very noisy?
If your Grouw! Lawn Mower is making excessive noise, try these steps: Replace all the blades and screws simultaneously. Also, check for and remove any foreign objects like ropes, plastic, or tape that might be stuck to the blades. If the noise persists and seems to be coming from the motors that turn the cutting disc or wheels, have your Grouw! Lawn Mower inspected by a professional.
What to do if Grouw! Lawn Mower is stuck?
If your Grouw! Lawn Mower gets stuck, first press the OK button to restart it. If it repeatedly gets stuck, check the boundary wire to ensure it's correctly laid out, especially in narrow areas where the mower might struggle to maneuver. Also, remove any obstacles like branches that could be restricting its movement.
What to do if Grouw! 17935 has been lifted?
If your Grouw! Lawn Mower displays an error indicating it has been lifted, press the OK button to restart it. If the error continues, inspect the work area for obstacles taller than 100 mm that might be causing the mower to roll over. If the grass is taller than 60 mm, use a regular lawnmower to cut it down.
What to do if Grouw! 17935 has been overloaded?
If your Grouw! Lawn Mower is overloaded, cut the tall grass with a regular lawnmower and clean the robot lawnmower. After that, press the OK button to restart the Grouw! Lawn Mower.
What to do if Grouw! 17935 has rolled over?
If your Grouw! Lawn Mower has rolled over, reposition it and press the OK button to restart. If the issue is a steep slope, adjust the boundary wire to avoid that area.
What to do if Grouw! 17935 LEDs on the control panel do not light up?
If the LEDs on your Grouw! Lawn Mower's control panel don't light up, press and hold the POWER button (a) for 3 seconds to switch it on. If it still doesn't turn on, manually charge it at the charging station.
How to fix charging error on Grouw! Lawn Mower?
If you are experiencing a charging error with your Grouw! Lawn Mower, ensure that the charging poles are clean and correctly inserted into the charging socket on the robot. If the battery is completely flat, you might need to perform manual charging.
What to do if Grouw! Lawn Mower shows skirt error?
If your Grouw! Lawn Mower displays a skirt error, remove any pieces of metal from the area. Then, press the OK button to restart the mower.
What to do if Grouw! Lawn Mower runs in circles along the boundary wire?
If your Grouw! Lawn Mower runs in circles along the boundary wire, there might be a live cable in the ground nearby. Try moving the boundary wire to a different location.
What to do if Grouw! Lawn Mower boundary wire signal error?
If your Grouw! Lawn Mower is showing a boundary wire signal error, first, make sure the entire mower is within the designated work area. Then, check the indicator light on the charging station.
Read accompanying documentation before use and save for future reference.
Lists and identifies the primary parts of the robot lawnmower for user recognition.
Step-by-step guide on how to safely turn the robot lawnmower on and off.
Explains the process and importance of the robot lawnmower returning to its charging base.
Instructions on how to schedule the robot lawnmower's daily operating hours.
Details on configuring the robot for lawns with multiple distinct mowing zones.
Describes the error when the mower is lifted and how to resolve it.
Details the error for a stuck mower and troubleshooting steps.
Explains the skirt error and how to fix it, possibly related to magnets.
Covers issues with the boundary wire signal and indicator light meanings.
Addresses errors related to battery temperature extremes during operation.
Explains battery defects and replacement procedures.
Describes issues preventing the robot from charging correctly.
Provides instructions for manually charging the robot's battery.
Discusses overheating of the Printed Circuit Board and its impact.
Details the error when the mower rolls over and how to correct it.
Explains overload protection and how to address it.
Describes errors caused by obstructions near the boundary wire.
Troubleshooting steps for when the control panel fails to power on the mower.
Solutions for when the robot fails to return to its charging station.
Addresses issues where the mower moves in circles instead of mowing.
Guidance on diagnosing and fixing excessive noise from the robot.
Troubleshooting steps for when the control panel's indicator lights are not functioning.
General safety precautions for operating the robot lawnmower safely.
Guidelines for preparing and maintaining the robot's mowing area.
Safety advice regarding the condition and maintenance of the robot itself.
Explains the function and importance of the robot's built-in safety mechanisms.
Describes how the robot's mowing area is defined and how it navigates.
Advice on planning the layout of the boundary wire to accommodate garden obstacles.
Detailed instructions for correctly positioning and installing the charging station.
General| Brand | Grouw! |
|---|---|
| Model | 17935 |
| Category | Lawn Mower |
| Language | English |
To Next Page
