Need help?Do you have a question about the Grove GMK 3050-1 and is the answer not in the manual?
Guidance on how to effectively use the maintenance manual for proper operation and maintenance.
Explanation of symbols and warnings used in the manual to highlight important information and potential hazards.
Details on proper maintenance procedures, qualifications, and common defects from improper maintenance.
Defines terms like 'forwards', 'backwards', 'left', 'right' for clear communication in operating instructions.
Provides conversion factors between metric and US units for measurements used with the truck crane.
General safety rules and precautions to be observed when carrying out maintenance work on the truck crane.
Guidelines for handling, collecting, storing, and disposing of environmentally harmful substances during maintenance.
Identifies specific components on the truck crane that are susceptible to damage during cleaning operations.
Details the various maintenance plans and their corresponding intervals based on time, kilometers, or operating hours.
Describes the scope and content of different maintenance plans (D, W, M, Y) for the carrier and superstructure.
Outlines the requirements and components for periodic visual inspections of the truck crane.
Details procedures for monitoring winches, including theoretical service life calculation and proportion used.
Provides a comprehensive table of lubricants and their specifications for various components of the crane.
Lists and describes various consumables such as fuel, coolant admixtures, and washing system fluids.
Details maintenance tasks related to the vehicle engine, including oil level checks and filter changes.
Instructions for checking and changing the oil and filter in the automatic transmission.
Procedures for checking and changing the oil in the transfer case.
Maintenance tasks for axle lines, including checking and changing oil, and lubricating cardan shafts.
Procedures for checking tyre damage, pressure, tightness of wheel nuts, and changing wheels.
Instructions for checking the brake lining thickness.
Maintenance tasks for the suspension struts, including checking oil level and retaining bolts.
Procedure for checking the hydraulic steering system for leaks.
Maintenance procedures for the compressed air system, including draining and replacing the drier cartridge.
Covers checking oil level, hoses, leaks, cleaning magnetic rods, changing filters, and taking oil samples.
Instructions for checking and topping up the grease container and bleeding the system.
Maintenance of lighting, indicators, and batteries, including acid level and concentration checks.
Procedures for checking refrigerant, cleaning condenser fins, and checking hoses and compressor.
Maintenance tasks for the towbar coupling, including lubrication, bearing checks, and cotter pin inspection.
Lubrication of outrigger beams and checking the auxiliary heater operation.
Maintenance procedures for the crane engine, including oil level, coolant, and air filter checks.
Tasks related to hoisting gears, such as checking oil level, leaks, brake function, and oil changes.
Procedures for checking oil level, leaks, and lubricating slewing gear pinions and gear rims.
Maintenance steps for the pump transfer case, including checking condition, oil level, and changing oil.
Covers checking oil level, hoses, leaks, bleeding cylinders, cleaning magnetic rods, and changing filters.
Lubrication procedures for locking pins and telescopic slide faces of the main boom.
Procedures for checking hoist rope condition, position, and replacement guidelines.
Maintenance of the slip ring assembly and lubrication of the slewing angle sensor.
Checking and topping up the grease container level for the central lubrication system.
Inspection and lubrication procedures for hook blocks, including sheaves and load hooks.
Checking battery acid level and concentration for the superstructure electrical system.
Maintenance of the air-conditioning system, including refrigerant check and condenser cleaning.
Checking the auxiliary heater and lubricating the piston rod of the derricking cylinder.
Provides torque values for various metric standard and fine screw threads based on bolt quality.
Lists specific tightening torques for components like suspension struts, wheel nuts, and slewing gears.
General| Brand | Grove |
|---|---|
| Model | GMK 3050-1 |
| Category | Construction Equipment |
| Language | English |
To Next Page
