How to Use
Before use, please put INFINITY 1500 on a clean and flat ground to ensure that the machine will not be in
contact with liquid or tilted, and check whether there are foreign objects on the body.
Product ON/OFF
A) To turn on the INFINITY 1500, long press the power button until the screen lights up.
B) To turn off the INFINITY 1500, press and hold the power button until you hear a beep and observe the
OFF prompts on the screen.
DC Power ON/OFF
C) Short press the DC power button to turn on the DC output supply (including all USB ports and car output port).
You should hear a beep sound and observe that the DC power indicator lights up.
D)To turn off the DC output power, short press the DC power button. You should observe that the DC power
indicator turns off. When the output power of a single DC port exceeds the rated power below, the system will
trigger an overload alarm and cut off the DC output.
The maximum output power of a USB-A port is 12W.
The maximum output power of a Fast Charge USB-A port is 18W.
The maximum output power of a USB-C port is 60W.
AC Power ON/OFF
E) To turn on the AC output supply, short press the AC power button, and you will observe the AC power indicator
lights up. and the AC output port can be used. Short press the AC output button again, you will observe the AC
power indicator lights off and the AC output will be turned off.
F) Long press the AC power button for 6 seconds to change AC frequency mode (50Hz/60Hz).
The total output power of the AC output ports is up to 2000W(across all ports). When the total output power
exceeds the rated power, the product will trigger overload protection, cut off the AC output and prompt an
overload alarm. Unplugging the AC load will clear the alarm and restore normal AC output.
Wireless Charging
G)Wireless charging is activated when the DC power is turned on. You can charge wirelessly by placing the device
within the wireless charging range on top of the product.
This feature is only available for devices that support wireless charging. You can check the wireless charging
status by looking at the LED indicators on the wireless charging panel.
Slow breathing blue: your device is being charged wirelessly.
Flashing sky blue: an error occurred during wireless charging.
Steady green: wireless charging is ready, but no devices are detected.
To Next Page
Loading...