33
34
Figure 8.4
Figure 8.6
Figure 8.7
Figure 8.5
Inverter Details Page：
1>Click on the inverter name to enter the details main interface, which contains
information about inverter power and power generation. Enter the control, log, edit,
and parameter interface by clicking the icon below the interface.
2>Control: user set inverter on/off, set active power, set reactive power, set PF, set inverter
time, set grid voltage high, set grid voltage low. The operation password is:
inverter+date.
For example, if the date of the day is April 18, 2019, the password is inverter20190418.
3>Parameter interface: view the basic information such as the serial number, model,
voltage, current and power of the inverter.
4>Data interface: View PV power, PV voltage, PV current, R phase power, S phase power,
T phase power and output power of the inverter, and view detailed monitoring data by
sliding up.
5>Log interface: View the fault information of the inverter.
To Next Page
Loading...
