Operating temperature range
–25°C ... +60°C (derating over 45°C)
Environmental Protection Rating
Certificates and approvals
EN 61000-3, EN 61000-6, EN/IEC 62109-1, EN/IEC
62109-2,
If the inverter does not operate in the future, it needs to be properly disposing. The steps
are as follows:
1>Disconnect the external AC short circuit and prevent reconnection due to
misoperation.
2>Turn the DC switch to "OFF" position.
3>Wait at least 5 minutes until the internal capacitor discharge is completed.
4>Disconnect the AC connector.
5>Disconnect DC connector.
6>Remove the inverter from the wall.
7>Disposing of the inverter.
If you have technical problems concerning our products, contact your installer or
Growatt, please provide information below for better support.
1>Inverter type
2>Serial number of inverter
3>Error code of inverter
4>LED status of inverter
5>DC input voltage of inverter (Modules information)
6>Inverter communication method
13 Contact
12 Quality assurance
Decommissioning 11
Please refer to related file.
SHENZHEN GROWATT NEW ENERGY TECHNOLOGY CO.,LTD
No.28 Guangming Road, Shiyan Street, Bao'an District, Shenzhen, P.R.China
T: +86 755 2747 1942
E :service@ginverter.com
W :www.ginverter.com
65
66