To Next PageTo Next Page
Need help?Do you have a question about the Growatt MAX 80KTL3 LV and is the answer not in the manual?
General| Model | MAX 80KTL3 LV |
|---|---|
| Rated Power | 80 kW |
| Max. DC Input Voltage | 1100 V |
| Input Voltage Range | 200 V - 1000 V |
| Start Voltage | 200 V |
| Nominal DC Voltage | 600 V |
| Max DC Input Current per MPPT | 26A |
| Max. Input Current per MPPT | 26 A |
| Nominal AC Power | 80 kW |
| Max. AC Output Power | 80 kW |
| Nominal AC Voltage | 400 V |
| THDi | < 3% |
| THD | < 3% |
| DC Switch | Yes |
| Protection Class | I |
| Overvoltage Category | II |
| Operating Temperature Range | -25 °C to +60 °C |
| Ingress Protection | IP65 |
| Topology | Transformerless |
| Efficiency | 98.6% |
| Protection Level | IP65 |
| Max. DC Power | 120000W |
| Max. DC Input Power | 120000 W |
| MPPT Voltage Range | 200 V - 1000 V |
| Max. AC Apparent Power | 88 kVA |
| AC Voltage Range | 320 V - 480 V |
| Nominal Grid Frequency | 50 Hz |
| Humidity | 0-100% |
| Communication | RS485 |
| Grid Frequency Range | 47 Hz - 52 Hz (50 Hz) / 57 Hz - 62 Hz (60 Hz) |
| Power Factor | 0.8 leading - 0.8 lagging |
| Frequency Range | 47 Hz - 52 Hz (50 Hz) / 57 Hz - 62 Hz (60 Hz) |
Details requirements for qualified electrical technicians for installation, troubleshooting, and communication settings.
Highlights general safety precautions for installation and handling of the inverter and its components.
Describes the optional Arc Fault Circuit Interrupter function for fire prevention.
Explains the optional function to mitigate Potential Induced Degradation in PV modules.
Details essential requirements for safe and effective inverter installation, including wall, space, and environment.
Specifies environmental conditions and placement guidelines to ensure optimal inverter performance and lifespan.
Guides on how to install the wall mount bracket, including drilling and securing the plate.
Details the procedure for physically mounting the inverter onto the installed wall bracket.
Provides instructions and safety precautions for connecting the inverter to the AC power grid.
Details the procedure and safety warnings for connecting the DC input from solar panels to the inverter.
Provides instructions for properly grounding the inverter and system components for safety.
Details the initial setup and configuration process for the inverter, including address and time settings.
Lists error codes, their descriptions, and suggested actions for troubleshooting inverter faults.
