To Next PageTo Next Page
Need help?Do you have a question about the Growatt MIC 1500TL-X and is the answer not in the manual?
General| Max. DC Voltage | 550 V |
|---|---|
| Nominal AC Power | 1500 W |
| Dimensions | 274 x 254 x 138 mm |
| Weight | 6.2 kg |
| Start Voltage | 80 V |
| Nominal DC Voltage | 360 V |
| Number of MPPTs | 1 |
| Nominal AC Voltage | 220 V / 230 V |
| AC Voltage Range | 180-280 V |
| Nominal Grid Frequency | 50 Hz / 60 Hz |
| Total Harmonic Distortion (THD) | <3% |
| Power Factor | >0.99 |
| DC Connection Type | MC4 |
| Protection Degree | IP65 |
| Maximum Input Voltage | 550 V |
| Number of MPP Trackers | 1 |
| Rated Output Power | 1500 W |
| Output Voltage | 220 V / 230 V |
| Output Frequency | 50 Hz / 60 Hz |
| Cooling Method | Natural cooling |
| Protection Level | IP65 |
| Max. AC Power | 1650 W |
| AC Connection Type | Plug and play connector |
| Operating Temperature Range | -25°C to 60°C |
| Maximum Output Power | 1650 W |
Outlines fundamental safety rules to prevent potential hazards during use.
Covers safety during assembly, electrical connections, and wiring procedures.
Provides crucial safety advice for operating the inverter to minimize risks.
Emphasizes essential safety measures to be followed before starting installation.
Provides criteria and guidance for selecting a suitable site for the inverter.
Step-by-step instructions for securely attaching the inverter to a wall.
Highlights crucial safety rules for all electrical wiring and connections.
Detailed steps for properly connecting the AC output of the inverter.
Procedures for connecting the PV array and essential grounding information.
Steps for powering on the inverter and performing initial configuration.
Step-by-step guide for powering on the inverter and initiating operation.
Explains various error codes displayed on the inverter screen and their meanings.
Lists specific warning/fault codes and suggested corrective actions.
