Growatt MIN 6000TL-XH - 7.3.4 Backup Mode Setting; 7.3.5 Work Mode Setting; 7.3.6 Grid Charge Setting

7.3.6 Grid Charge setting
When the –XH series inverter is used together with the BDC box, the inverter can absorb
the energy from the grid to charge the battery, and the user can enable the grid charging
function(default is disable) through the OLED. Single touch to switch display or make the
number +1.Double touch to confirm the setting. as described below:
37
38
Grid Charge
Disable
Enable
Disable
Enable
Set OK
Set OKStrorage Setting
Password
123
Country/Area
VDE0126
General
Advanced
Multiple single touch
Single touchDouble touch
Double touch
Double touch
Double touch
Double touch
Double touch
Time Period
Loadprio 00-01
Time1: Disable
Loadprio 00-01
Time1: Disable
Batprio 00-01
Time1: Disable
Gridprio 00-01
Time1: Disable
Loadprio NN-01
Time1: Disable
Loadprio 00-01
Time1: Disable
Loadprio 00-NN
Time1: Disable
Loadprio 00-01
Time1: Disable
Loadprio 00-01
Time1: Enable
Multiple single
touch
Multiple single
touch
Multiple single
touch
Double touch
Double touch Double touch
Double touch
Double touch
Double touchSingle touch
Single touch
Loadprio 00-01
Time2: Disable
Loadprio 00-01
Time2: Disable
Batprio 00-01
Time2: Disable
Gridprio 00-01
Time2: Disable
Loadprio NN-01
Time2: Disable
Loadprio 00-01
Time2: Disable
Loadprio 00-NN
Time2: Disable
Loadprio 00-01
Time2: Disable
Loadprio 00-01
Time2: Enable
Multiple single
touch
Multiple single
touch
Multiple single
touch
Double touch
Double touch Double touch
Double touch
Double touchSingle touch
Single touch
Double touch
Loadprio 00-01
Time3: Disable
Loadprio 00-01
Time3: Disable
Batprio 00-01
Time3: Disable
Gridprio 00-01
Time3: Disable
Loadprio NN-01
Time3: Disable
Loadprio 00-01
Time3: Disable
Loadprio 00-NN
Time3: Disable
Loadprio 00-01
Time3: Disable
Loadprio 00-01
Time3: Enable
Multiple single
touch
Multiple single
touch
Multiple single
touch
Double touch
Double touch Double touch
Double touch
Double touchSingle touch
Single touch
Double touch
Strorage Setting
Password
123
General
Advanced
Country/Aera
VDE0126
Double touch
Multiple single touch
Double touch
Double touch
Set Parameter
Double touch
7.3.4 Backup mode setting
When the –XH series inverter is used with the BDC box and the Backup Interface box,the
Grid is abnormal,the inverter can work in backup mode to provide energy to the off-grid
load.The maximum output power is 3000VA.In the Backup mode you can set the output
voltage(default is 230V) and output frequency(default is 50Hz).If the Backup mode is
disable,the inverter will turn off the output when the grid is absent.The user can enable
the Backup mode through OLED settings, Single touch to switch display or make the
number +1.Double touch to confirm the setting , as described below:
Backup Setting
Enable
Disable
Enable
Disable
Enable
Double touch
Single touch
Double touch
Set OK
AC Volt
230V 240V 208V
AC Volt
230V 240V 208V
AC Freq
50Hz 60Hz
AC Volt
230V 240V 208V
AC Freq
50Hz 60Hz
Double touch
Double touch
Single
touch
Single
touch
Double touch
Double touch
Set OK
Single
touch
Double touch
Double touch
Manual Offgrid
Enable
Disable
Enable
Disable
Enable
Double touch
Single touch
Double touch
Set OK
Set OK
Double touch
Country/Aera
VDE0126
Password
123
General
Advanced
Double touch
Double touch
Multiple
single touch
Single touch
7.3.5 Work mode setting
When the –XH series inverter is used together with BDC box, the inverter has three
working modes, Grid priority、Battery priority and Load priority(default is Load priority
mode), Users can set the inverter to work in different modes in different time periods
through OLED,Single touch to switch display or make the number + 1.Double touch to
confirm the setting, as described below: (If you want to set more time periods,you can
use the Shinebus tool.)
*
*
*