OPERATING SYSTEM
INSTALLATION
With the power switch in the OFF position, insert the included
MicroSD card (T) into the card slot on the back of the BUILD-
A-CADE. Turn the unit ON and wait for the installer to initialize.
Once the PINN installer initializes, Select your language and
keyboard settings from the menu at the bottom of the screen
with the joystick or trackball and A button, or USB mouse.
Next, select WiFi, choose your WiFi network and enter the
password using either the on-screen or USB keyboard.
Check the box next to the operating system.
Click Install and then click Yes on the Confirm window.
This process can take a long time since the installer must
download the OS from the internet before installation begins.
After the installation completes, click OK. The system will boot
to EmulationStation.
Choose Options, then scroll to Raspi-Config and press A.
Scroll to Localisation Options and press rear btn. 1 (Enter).
Then select WLAN Country, choose from the list and press
Enter. Close the confirmation window with Enter, then press
rear btn. 2 (ESC) to exit. Restart if prompted.
This step requires WiFi internet access.
To Next Page
Loading...