GRS GraverMax G8 - Page 20

18
GraverMax™ G8 Back Parts List
Contact GRS or an authorized GRS dealer for replacement parts or repairs.
Visit grs.com/dealers for dealers in your country.
004-811
022-965
044-055
002-062
044-235
044-059
002-186
022-245
044-070
004-817
004-818
004-816
004-815
002-104
022-962-R-PART
TWO THREADS SHOWING
ON BACK SIDE ZZZ ON NUTS SHOULD BE DOWN
WASHER TO BE
ON NUT SIDE
DO NOT OVERTIGHTEN
MTR
VALVE
PWR REGULATOR
MOTOR
POWER
SWITCH
B
R
B
R
R
Y
B
LIT-294
004-809
A
B
024-118
044-222
044-111
024-042
002-092
024-036
024-119
BLACK 5.50"
RED 7.50"
REMOVE INSULATION ON
WIRE ENDS .220/.280
CRIMP CONNECTIONS
REAR PLATE
044-137
PART NO. QTY. DESCRIPTION 002-062 2 RHMS, #8-32 x 0.5” Z/P 002-092 2 TERMINAL, 22-16AWG #10 RING 002-104 2 NUT, #8-32 HEXKEP Z/P 002-186 2 RIVET, 0.125” DIA. x 0.125” POP 004-809 1 WIRE, B-22AWG T-RING T-RING 004-811 1 WIRE, B-R-22AWG P-JCK F-SPD T-R 004-815 1 WIRE, R-22AWG F-SPADE T-RING 004-816 1 WIRE, B-22AWG F-SPADE T-RING 004-817 1 WIRE, R-22AWG F-SPADE F-SPADE 004-818 1 WIRE, B-22AWG F-SPADE F-SPADE 022-245 1 GROMMET, 0.5” O.D. 0.188” I.D. RUBBER 022-962-R-PART 1 CONTROLLER, 24VDC PWM MTR 022-965 2 FITTING, PTC 0.25” BULKHEAD 024-036 1 VALVE, 24VDC SOLENOID 024-042 1 FITTING, PTC.25” M#10-32 024-118 2 NUT, #4-40 HEX Z/P 024-119 2 RHMS, #4-40 X .63” Z/P 044-055 1 PLATE, REAR FRAME 044-059 1 DECAL, AIR INPUT/THROTTLE 044-070 1 TUBING, PU CLR 0.25” O.D. 0.17” I.D. 044-111 1 TUBING, PU BLK .250”OD .130”ID 044-137 1 TUBING, PU BLK .250”OD .130”ID 044-222 1 BRACKET, SOLENOIDv 044-235 1 SERIAL PLATE, GRAVERMAXG8 LIT-294 1 DECAL, DRY AIR NOTICE