To Next PageTo Next Page
Need help?Do you have a question about the GRS GraverMax G8 and is the answer not in the manual?
Details on mounting and connecting the air filter for proper system operation.
Instructions for placing and connecting the foot throttle to the system.
Guidance on connecting one or two handpieces using push-to-connect fittings.
Information on using the auxiliary port for rotary handpieces or pneumatic tools.
Steps for connecting the electrical power converter to the system and outlet.
Explains SPM settings, their uses for different techniques, and how to experiment with them.
Details on the critical process of adjusting air pressure and SPM for optimal handpiece performance.
Guides on identifying and resolving issues like handpiece vibration, knocking, or decreased power.
Instructions on how to properly use the foot throttle for controlling handpiece power and movement.
Explains the light grip and guidance technique for pneumatic handpieces, avoiding over-firm grip.
Details on using the bias control for adjusting the foot throttle's starting position for fine detail work.
Instructions for cleaning the handpiece piston and spring using paper to remove dirt and residue.
Maintenance advice for the foot throttle, including cleaning dust and oiling hinges.
Refers to separate operating instructions for routine maintenance of the rotary handpiece.
Information for owners of the GRS Progressive Foot Throttle regarding system compatibility.
Guidance on preventing and managing water and contaminant buildup in the air supply system.
Information on ordering operator-replaceable parts and contacting GRS for service.
Lists parts that can be serviced by the operator and where to find instructions.
General