GRS GraverMax G8 - IMPORTANT NOTICE FOR OPERATORS

1
FOR PROPER OPERATION, THIS SYSTEM REQUIRES:
 Included 24-volt power converter connected to a properly grounded electrical
power outlet
 Clean, dry, oil-free air provided by an air compressor
 A compatible GRS pneumatic handpiece
 A graver or similar tool
 A clean, sturdy work surface with adequate lighting
 Workholding device or material
IMPORTANT NOTICE FOR OPERATORS
Read this manual thoroughly before operation. The manufacturer is
not responsible for injury resulting from improper operation or when
used by untrained operators.
+VUV[TVKPM`[OPZLX\PWTLU[VYYLTV]L^HYUPUNSHILSZ4VKPÄJH[PVUZ
can increase risks to the operator. Do not use this equipment if it is
damaged.
This equipment allows the use of small sharp cutting tools
that can break suddenly. Always wear eye protection appropriate for
each application, and protect hands from sharp edges.
Like other power tools, this device exposes the operator to
mechanical vibration. If any user experiences discomfort, pain,
U\TIULZZHJOPUNL[JPU[OLPYOHUKZÄUNLYZHYTZVYYLSH[LKQVPU[Z
discontinue use and consult with an appropriate health professional.
Although this equipment does not generate dust itself, the tools used
in the handpieces may do so. When sharpening tools, the user should
take appropriate steps to avoid dust inhalation. Certain tool materials
generate harmful dust while being ground or sharpened.
;OLWYVWLY\ZLVM[OPZLX\PWTLU[KVLZUV[NLULYH[LZPNUPÄJHU[VY
harmful noise emissions.