About this instruction
4 | 80
BA_TD3-BS001en_014_softliQ-SD
1 About this instruction
1.1 Other applicable documents
The following documents also apply in the case of the softliQ:SD:
● For Grünbeck's technical service / authorised service company:
Technical service manual of water softener softliQ:SD, order-no.: TD4-BS001
● The manuals of all accessories used.
1.2 Target group
The intended audience for this manual is comprised of specialist installers and owner-users.
1.3 Storage of the documents
Keep this instruction and all other applicable documents, so that they are available when
needed.
1.4 Symbols used
This symbol identifies instructions that you must comply with for your personal safety as
well as to avoid damage to property.
This symbol identifies information and instructions that you must comply with in order to
avoid damage to property
This symbol identifies important information about the product or its handling.
This symbol identifies work that is only allowed to be carried out by a specialist installer.
In Germany, the installation company must be registered in an installation directory of a
water supply company acc. to §12(2) AVB Wasser V (German Ordinance on General
Conditions for the Supply of Water).
This symbol designates tasks that may only be performed by Grünbeck's technical
service / authorised service company or by specialist installers trained by Grünbeck.
This symbol identifies work that may only be carried out by qualified electrical experts
according to the VDE guidelines or according to the guidelines of similar local institutions.
To Next Page
Loading...
