Grunbeck softliQ:SD18 - 1 St Maintenance

Operation log
71 | 80
BA_TD3-BS001en_014_softliQ
-SD
1st maintenance
Operating values
Raw water hardness measured / set
/
Soft water hardness measured / set
/
Soft water hardness 0 °dH inspection
OK
Operating pressure
[bar]
Reading of residential water meter
[m³]
Soft water volume meter
[m³]
Regeneration counter
Read out error memory
Error
Date
Time
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Maintenance work
OK
Hose connections checked for leaks and damage
Soft water meter checked for pulse output
Regeneration water meter checked for pulse output
Cables checked for damage and firm seating
Injector and injector sieve cleaned / checked
Chlorine cell checked
Brine valve level electrodes cleaned / replaced
Brine tank cleaned
Salt tablets checked for cleanliness
Reference position moved to manually (C 005)
Suction power of the injector checked during salting:
0.1 l in 60 – 120 s
Current at the chlorine cell during salting
Water sensor checked for function
Product / control valve checked for leaks
Flushing water hose checked for leaks in operation
Filling and suction hose to the brine valve checked for leaks during operation
Maintenance interval reset
Remarks
Performed by
Company:
Service technician: