Need help?Do you have a question about the Grundfos Auto ADAPT ALPHA2 and is the answer not in the manual?
General| Technology | Auto ADAPT |
|---|---|
| Pump Type | Circulator Pump |
| Max. Operating Pressure | 10 bar |
| Enclosure Class | IP42 |
| Insulation Class | F |
| Power Supply | 1x230 V, 50/60 Hz |
| Temperature Range | +2°C to +110°C |
| Approvals | CE |
| Material | Cast iron |
| Ambient Temperature Range | 0°C to +40°C |
| Model | Grundfos Auto ADAPT ALPHA2 |
Explains hazard symbols (DANGER, WARNING, CAUTION) and informational symbols used in the manual.
Details on making pipe connections, flushing, installing check valve, and pump orientation.
Procedure for connecting the power plug for pump models equipped with a line cord.
Detailed wiring procedure for connecting the pump via a terminal box, including safety notes.
How to change pump settings, including factory default and recommended alternative settings.
Table matching specific applications to recommended control modes like AUTOADAPT, Constant Pressure, or Speed.
To Next Page
