Fig. 29 Second function level, part 2
Setting code 111
Calibration
Dosing controller
Pressure control
Memory function
Weighting of current input/output
Batch on/off
ON/OFF
Adjustment of batch quantity and
dosing rate for batch operation, see
section
9.11 Batch menu / batch mode
Timer on/off
ON/OFF
Adjustment of batch quantity, dosing
rate and times for timer operation, see
section
9.12 Timer menu / timer mode
Slow mode on/off
ON/OFF
To set the slow-mode factor, see
section
9.6.8 Slow mode
Display of total dosing quantity [l] (resettable)
0.000 - 9.999
10.00 - 99.99
100.0 - 999.9
1000 - 9999
Display of operating time of drive
1 = 10 h to 9999 = 99,990 h
Batch
PROFIBUS
(only with
PROFIBUS)
Slow mode
(anti-cavitation)
Dosing quantity
counter
Operating hours
counter
See previous page
Bus address indication
Timer
To Next Page
Loading...
Need help?
General
