61
Accessories
Pulsation dampener
Pulsation dampener
The pulsation dampener can be installed both in the
suction or discharge line for reducing pressure surges,
thereby ensuring a steady flow. The dampener is
particularly suitable for long discharge lines and/or lines
with a small diameter.
Installed in the discharge line, the dampener can be
used to optimize dosing accuracy and to protect the
pump and discharge line against pressure surges.
Depending on the system pressure, it may be neces-
sary to install a back-pressure valve after the dampener
to optimize its function.
Maximum pressure: 145 psi (10 bar).
Pulsation dampener
TM01 9593 2100
Size 80 Size 250 Sizes 750
TM01 2206 1498
TM01 2207 1498
TM01 22081498
Size
Maximum
flow rate
[l/h]
Materials Connections Dimensions [mm]
Product
number
Housing Diaphragm Type
Inner/outer tubing or
pipe diameters/
thread
AB C D E
80 15.9 (60)
PP CSM
Tubing 1/4" / 3/8" 172 G 3/4" M6 50
96479971
PVC CSM 96480706
PVC FKM 96479972
250 39.6 (150)
PP
CSM
NPT 1/2" 314 140 G 1 1/4" M8 58
96480694
FKM 96480693
PVC
CSM 96480696
FKM 96480695
750 99 (375)
PP
CSM
NPT 1/2" 363 347 G 1 1/4" Ø9 72
96480700
FKM 96480698
PVC
CSM 96480704
FKM 96480703
Dm123.book Page 61 Tuesday, February 8, 2005 8:24 AM
To Next Page
Loading...
