TM031131
R100 and indicator lights
Pos. Description
1 Red
2 Green
5. Start-up
Start-up must be carried out by authorized personnel.
Prior to start up, read the installation and
operating instructions for the product in
question.
6. Functions of indicator lights
See fig. R100 and indicator lights.
Indication
Description
The green indica-
tor light is off.
The electricity supply is interrup-
ted.
The green indica-
tor light flashes
slowly (1 Hz).
The module is ready for opera-
tion, but there is no communica-
tion yet.
The green indica-
tor light is perma-
nently on.
The electricity supply is on, and
the module is starting up.
The green indica-
tor light flashes
quickly (5 Hz).
The module is ready for opera-
tion, and IO 351 and CU 351
communicate.
The red indicator
flashes.
IO 351 and R100 communicate.
Related information
4.6 Allocation of address
7. Technical data
Transient voltages typically present on the mains
supply are category 2.
Altitudeabove sea level
Maximum 2000 m.
Ambient temperature
• During operation: 0 °C to +50 °C. (must not be
exposed to direct sunlight).
• In stock: -20 °C to +60 °C.
• During transportation: -20 °C to +60 °C.
Relative air humidity
From 5 % to 95 %.
Pollution degree
Category 2.
10
English (GB)
To Next Page
Loading...