Grundfos MS Series - Checking Motor Rotation Direction; Checking Pump Set Rotation; Three-Phase Motor Wiring; Direct-on-Line Starting Wiring

Valid for Grundfos products:MS402, MS4000,
MS6000, MS6000P, MMS6, MMS8000, MMS10000,
MMS12000
• Low Voltage Directive (2014/35/EU).
Standard used: EN 60034-1: 2010.
• EMC Directive (2014/30/EU).
Standard used: EN 60034-1: 2010.
(Applies only to motors with Tempcon sensors)
• RoHS Directive: 2011/65/EU and 2015/863/EU
Standards used: EN 63000:2018
This EU declaration of conformity is only valid when
published as part of the Grundfos installation and
operating instructions (publication number
99464838).
Bjerringbro, 05/March/2021
Frank S. Madsen
Capability Manager, Electronics
Grundfos Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro, Denmark
Person authorised to compile technical file and
empowered to sign the EU declaration of conformity.
173
Declaration of conformity