Grundfos MS Series Manual

Declaration of conformity
GB: Ukrainian declaration of conformity
We, Grundfos, declare under our sole responsibility that the products to which the declaration below relates, are
in conformity with Ukrainian resolutions, standards and specifications to which conformity is declared, as listed
below:
Valid for Grundfos products:
MS402, MS4000, MS6000, MS6000P MMS6, MMS8000, MMS10000, MMS12000
Resolution No. 1067, 2015 - Technical Regulation of Low Voltage Electrical Equipment
Resolution No. 533, 2018 - Amendments to some provisions
Standards used: ДСТУ EN 60034-1:2016
Resolution No. 1077, 2015 - Technical Regulations on Electromagnetic Compatibility
Resolution No. 533, 2018 - Amendments to some provisions
Standards used: ДСТУ EN 60034-1:2016
Resolution No. 139, 2017 - Technical Regulations on Use of Certain Hazardous Substances in Electrical
and Electronic Equipment
Standards used: ДСТУ EN IEC 63000:2020
(Applies only to motors with Tempcon sensors).
Importer address:
LLC Grundfos Ukraine, Business Center Europe
103, Stolychne Shose, UA-03026 Kyiv, Ukraine
Phone: (+380) 44 237 0400
Email: ukraine@grundfos.com
This Ukrainian declaration of conformity is only valid when accompanying Grundfos instructions.
177
Declaration of conformity

Grundfos MS Series Specifications

General

Type	Submersible motor
Degree of protection	IP68
Insulation class	F
Power range	0.37 kW to 7.5 kW
Frequency	50 Hz, 60 Hz
Material	Stainless steel