Grundfos MS Series Manual

Declaration of conformity
UK declaration of conformity
We, Grundfos, declare under our sole responsibility
that the products to which the declaration below
relates, are in conformity with UK regulations,
standards and specifications to which conformity is
declared, as listed below:
Valid for products:
MS402, MS4000, MS6000, MS6000P, MMS6,
MMS8000, MMS10000, MMS12000
• Electrical Equipment (Safety) Regulations 2016.
Standard used: EN 60034-1:2010
• Electromagnetic Compatibility Regulations 2016
Standard used: EN 60034-1:2010
(Applies only to motors with Tempcon sensors.)
• The Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment
Regulations 2019
Standard used: IEC EN 63000:2018
These motors must not be put into service until the
machinery into which they are to be incorporated has
been declared in conformity with the relevant
directives.
This UK declaration of conformity is only valid when
accompanying Grundfos instructions.
UK Importer: Grundfos Pumps ltd. Grovebury Road,
Leighton Buzzard, LU7 4TL.
Bjerringbro, 05/March/2021
Frank S. Madsen
Capability Manager, Electronics
Grundfos Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro, Denmark
Manufacturer and person empowered to sign the UK
declaration of conformity.
10000354231
174
Declaration of conformity

Grundfos MS Series Specifications

General

Type	Submersible motor
Degree of protection	IP68
Insulation class	F
Power range	0.37 kW to 7.5 kW
Frequency	50 Hz, 60 Hz
Material	Stainless steel