Need help?Do you have a question about the Grundfos PHT A-F250 and is the answer not in the manual?
General| Type | Pressure Transmitter |
|---|---|
| Series | PHT |
| Model | A-F250 |
| Output Signal | 4-20 mA |
| Accuracy | ±0.5% FS |
| Housing Material | Stainless steel |
| Media Compatibility | Water, wastewater |
Explains the fundamental function of the PHT A pressurisation unit.
Details the arrangement and components of the standard PHT A-N/D/F models.
Explains the design for providing top-up for two systems with PHT A-T models.
Covers how faults are displayed, acknowledged, logged, and cleared.
Guides float valve adjustment for N/D/V and F/T models, including filters and restrictors.
Provides essential steps for priming pumps to prevent damage during initial operation.
A step-by-step guide to verify correct installation procedures are followed.
A checklist to ensure all steps are completed before the unit is put into operation.
Illustrates the terminal layout and connections for all PHT models.
Provides a detailed wiring diagram for the PHT unit, including wire specifications.
A comprehensive guide to identify and resolve common faults with their remedies.
To Next Page
