Need help?Do you have a question about the Grundfos UP 26-116 and is the answer not in the manual?
General| Type | Circulator pump |
|---|---|
| Power Consumption | 248 W |
| Voltage | 115 V |
| Phase | 1 |
| Housing Material | Cast Iron |
| Temperature Range | 2°C to 110°C |
| Maximum Operating Pressure | 10 bar |
| Liquid Temperature Range | 2°C to 110°C |
| Maximum System Pressure | 10 bar |
| Max Flow Rate | 1.6 m³/h |
| Max Head | 4.5 m |
| Max Liquid Temperature | 110°C |
| Impeller Material | Composite |
Key checks to perform before installing the circulator pump.
Instructions for wiring single-speed and multi-speed pumps.
Details on connecting power and ground wires for single-speed pumps.
Instructions for connecting conductors to terminals for multi-speed pumps.
Steps to diagnose and resolve issues when the pump does not run.
To Next Page
