Grundig 32 GFB 6820 User Manual

ENGLISH
94
SETTING FURTHER CHANNELS
-----------------------------------------------------
Changing stored analogue
channels
If channels were stored with the automatic chan-
nel search during the tuning of the television
channels, you can delete them. You can also
change or enter the name of a channel and skip
a channel.
Selecting channel lists
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
V «, » Λ «,
»
<
« or »
>
« and press »OK« to confirm.
3 Select the menu item »Source« with »
>
« or
»
<
« and press » V « to confirm.
– »Source« menu is active.
4 Select the line »Channel Editor« with »
V «
or »
Λ « and press »OK« to confirm.
– »Channel Editor« menu is displayed.
Note:
7
Additional operations are explained in the
following sections.
Deleting channels
1 In the »Channel Editor« menu, select the
channel(s) you want to delete with »
V «,
»
Λ «, »
<
« or »
>
«, and highlight the televi-
sion channel by pressing »OK«.
–Channel is marked with »✔«.
Note:
7
If several TV channels are to be deleted,
press »
V «, » Λ «, »
<
« or »
>
« to select
these and mark each one with »OK«.
2 Activade the »Tools« menu with »

« (yel-
low).
3 Select the line »Delete« with »
V « or » Λ «
and press »OK« to confirm.
4 To confirm deletion process, select the op-
tion »OK« with »
<
« or »
>
« and press »OK«
to confirm;
or
to cancel deletion process, select the option
»No« with »
<
« or »
>
« and press »OK« to
confirm.
5 Press »EXIT« to close the menu.
Entering the analog channel names
(maximum 8 characters)
1 In the »Channel Editor« menu, select the
channel you want to rename with »
V «,
»
Λ «, »
<
« or »
>
«, and highlight it by press-
ing »OK«.
– Channel is marked with »✔«.
2 Activade the »Tools« menu with »

« (yel-
low).
3 Select the line »Rename« with »
V « or » Λ «
and press »OK« to confirm.
4 Delete the current channel name step-by-
step with »

« (red).
5 Select the required character with »
V «,
»
Λ «, »
<
« or »
>
« and move to the next
character with »OK«.
– Using »Shift« ➡ »OK«, you can switch
between uppercase letters / numbers and
lowercase letters / special characters.
– Select »Del« to delete the character
entered and press »OK« to confirm.
6 Confirm the channel name with »

«
(green).
Note:
7
To enter other channel names, repeat steps
1 to 6.

Grundig 32 GFB 6820 Specifications

General

Screen shape	Flat
Display diagonal	32 \
Display technology	LED
Peak luminance ratio	65 %
Display diagonal (metric)	80 cm
Screen format adjustments	16:9
Motion interpolation technology	PPR (Picture Perfection Rate) 800 Hz
3D	-
Annual energy consumption	59 kWh
Channels quantity (DVB-C)	1000
Channels quantity (DVB-S2)	6000
Channels quantity (analog signal)	100
RMS rated power	28 W
Number of speakers	2
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	40.1 W
Tuner type	Analog & digital
Channels quantity	8100 channels
Digital signal format system	DVB-C, DVB-S2, DVB-T2, DVB-T2 HD
DVI port	No
HDMI ports quantity	3
DVI-D ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Product color	Black, Silver
Panel mounting interface	100 x 100 mm
Package depth	142 mm
Package width	797 mm
Package height	540 mm

Weight and Dimensions

Depth (with stand)	178 mm
Height (with stand)	484 mm
Weight (with stand)	6600 g
Depth (without stand)	76 mm
Width (without stand)	735 mm
Height (without stand)	443 mm
Weight (without stand)	5400 g