Grundig 32 VLE 5500 BG User Manual

ENGLISH
40
DIGI LINK
Your television is equipped with
the DIGI LINK function.
This function uses the CEC
(Consumer Electronics Control)
protocol.
CEC allows external devices which are connect-
ed to the »HDMI« sockets by an HDMI cable
(e.g. DVD player) to be operated with a remote
control.
Prerequisite is that the devices connected support
CEC. Read the operating manual for the external
device to find out how to activate the correspond-
ing function.
The DIGI LINK functions on your
television
Switching on the television
automatically from standby
If the external device (e.g. Blu-ray player) is
switched on, the television also switches on and
the appropriate HDMI preset is selected auto-
matically.
Depending on the features of the external de-
vice, the external device (e.g. AV receiver) can
be switched on alone, the television stays in
standby.
Automatic selection of the HDMI
preset on the television
If your television is switched on and you then
switch on the external device (e.g. DVD player),
the appropriate HDMI preset on the television
will be selected.
Selecting the menu language
The television menu language is automatically
selected on the external device (e.g. DVD player).
The external device must support this function.
Switching off the external device
automatically
If you switch your television to standby, the ex-
ternal device (if it is switched on) will also be
switched to standby.
DIGI LINK is always active on your television set.
OPERATION USING EXTERNAL DEVICES
-----------------------------
Searching for and activating
external devices
You can connect up to 11 devices with DIGI LINK
functions to your television.
1 Open the Tools menu with »TOOLS«.
2 Select the menu item »CEC« with »
V « or
»
Λ « and press »OK« to confirm.
– The »HDMI CEC Device List« appears.
3 Start the device search with »

« (red).
–
The devices found are displayed in the
menu.
4 Select the device for operation with » V «,
»
Λ «, »
<
« or »
>
« and press »OK« to mark it.
– If the selected device is connected to a
different input to the current one, a switch
to the respective input will occur auto-
matically.
5 Press »EXIT« to end the setting.

Grundig 32 VLE 5500 BG Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	32 \
Display brightness	- cd/m²
Display resolution	1366 x 768 pixels
Native aspect ratio	16:9
LED backlighting type	-
Display diagonal (metric)	80 cm
Supported graphics resolutions	1366 x 768
Motion interpolation technology	PPR (Picture Perfection Rate) 200 Hz
Annual energy consumption	58 kWh
Digital signal format system	DVB-C, DVB-S2, DVB-T
RMS rated power	40 W
PC in (D-Sub)	No
HDMI ports quantity	3
DVI-D ports quantity	0
USB 2.0 ports quantity	2
Digital audio optical out	1
Product color	Black
Panel mounting interface	200 x 100 mm
Power consumption (standby)	0.5 W
Package depth	138 mm
Package width	790 mm
Package height	580 mm
Package weight	6000 g

Weight and Dimensions

Depth (with stand)	173 mm
Depth (without stand)	76 mm
Width (without stand)	729 mm
Height (without stand)	449 mm
Weight (without stand)	4400 g