EasyManuals Logo

Grundig 32 VLE 5520 BN User Manual

Grundig 32 VLE 5520 BN
67 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
57
ENGLISH
Notes:
7
Use installation equipment supported /
suggested by your Multiswitch.
7
Other users / receivers connected to the
system may be affected if the specified user
band number and frequency is changed
during installation.
7
User band and User band frequency is
specified on the Multiswitch used; and
each user / receiver uses a specified user
band and user band frequency.
7
With SCR satellite system, auto search by
several users / receivers at the same time
may cause problems.
»22 KHz«: Depending on the LNB type,
22 kHz audio is selected. For a univer-
sal LNB, this option is set to »Auto« and
cannot be changed.
»DISEqC mode« and »LNB selection«:
depending on the type of antenna used,
use »
<
« or »
>
« select the option »Off«,
»DiSEqC 1.0« or »DiSEqC 1.1«.
»Off«: for a satellite system with only
one antenna.
» DiSEqC 1.0«: allows up to four satel-
lites to be received simultaneously.
Under »LNB selection«, use »
<
« or
»
>
« to select the option »1/4«, »2/4«,
»3/4« or »4/4«.
» DiSEqC 1.1«: allows up to 16 satel-
lites to be received simultaneously.
Under »LNB selection«, use »
<
« or
»
>
« to select the option »1/1 to
»16/16«.
5 Press »EXIT« to end the setting.
SPECIAL SETTINGS
----------------------------------------------------------------------------------------------------------
Settings for motorised antennas
(DiSEqC 1.2)
Your television set supports motorised satellite
systems in compliance with DiSEqC 1.2. This
function allows the satellite antenna to be oper-
ated via the television set.
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
The »SOURCE SETUP« menu appears.
3 Select the line »Antenna Settings« with »
V
«
or »
Λ
« and press
»OK«
to confirm.
4 Select the line »DiSEqC Mode« with »
V
« or
»
Λ
«. Select the option »DiSEqC1.2« with
»
<
« or »
>
«
The line »DiSEqC 1.2 SETTINGS« is active.
Notes:
7
Additional operations are explained in the
following sections.
7
The following description about the DiSEqC
1.2 settings premise a substantial expertise
about the satellite systems. Ask your
specialist dealer.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grundig 32 VLE 5520 BN and is the answer not in the manual?

Grundig 32 VLE 5520 BN Specifications

General IconGeneral
BrandGrundig
Model32 VLE 5520 BN
CategoryTV
LanguageEnglish

Related product manuals