63
ENGLISH
SPECIAL SETTINGS
----------------------------------------------------------------------------------------------------------
Entering channel names (8 digit
maximum)
1 In the »PROGRAME TABLE« menu, select the
television channel with »
V
«, »
Λ
«, »
<
« or
»
>
« and press »
« (red) to confirm.
2 Open the input keyboard with »
« (green).
Note:
7
If necessary, delete the current channel
name. To do this, select the »
« button
with »
<
« or »
>
« and delete repeatedly using
»OK«
.
3 Select the required letters or numbers with
»
V
«, »
Λ
«, »
<
« or »
>
« and confirm with
»OK«
.
Repeat the entry for further letters/numbers.
Note:
7
Use the »ABC« button to switch to upper
case letters and use the »?@123« button to
switch to symbols and numbers.
4 Save the channel name by using »
V
«, »
Λ
«,
»
<
« or »
>
« to select »Submit« and confirm
with
»OK«
.
Note:
7
If you wish to enter other channel names,
repeat steps 1 to 4.
Skipping television channels
You can highlight television channels to be
skipped when you select with »
Λ
« or »
V
«.
Selection is still possible using the number
buttons.
1 In the »PROGRAME TABLE« menu, switch over
to the list view with »
« (yellow).
2 Select the preferred channel with »
V
«
or »
Λ
«.
3 Select the column »Skip« with »
<
« or »
>
«
and use
»OK«
to mark the channel.
– The channel is marked using »✔«.
Note:
7
Channels can also be reactivated. Select the
channel with »
V
« or »
Λ
«, then select the
column »Skip« and reactivate the channel
with
»OK«
.
Note:
7
If you wish to remedy other television
channels, repeat steps 4 to 7.
8 Press »EXIT« to end the setting.
Changing stored analogue
channels
If channels were stored with the automatic chan-
nel search while tuning the television channels,
you can delete them. You can also store chan-
nels in a different preset, change or enter the
name of a channel as well as skip channels.
Selecting a channel list
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
– The »SOURCE SETUP« menu appears.
3 Select the line »Program Table« with »
V
« or
»
Λ
« and press
»OK«
to confirm.
– The »PROGRAME TABLE« menu appears.
Note:
7
Additional operations are explained in the
following sections.
Deleting channels
1
In the »
PROGRAME TABLE
« menu, select the
television channel to be deleted with
»
V
«,
»
Λ
«, »
<
« or »
>
« and press »
« (red) to con-
firm.
2 Delete the selected channel by pressing
»
« (yellow).
Note:
7
»
« (blue) allows all television channels
to be deleted.
3 Press »
« (green) to confirm the deletion
process.
To Next Page
Loading...
Need help?
General