Grundig 47 VLE 9372 BL

Questions and Answers

D
Donald HansonJul 31, 2025
How to fix a Grundig 47 VLE 9372 BL LCD TV with a snowy screen but no channels?
- T
  tpetersJul 31, 2025
  If your Grundig LCD TV screen shows static (snow) but no channels, here's what to check: * Ensure the antenna cable is securely connected. * Perform a channel scan to tune in available stations. * Adjust the brightness, contrast, and color settings. * Try tuning to a different channel to rule out station issues. * Relocate the TV to avoid interference from other electronic devices.
S
shannonandrewAug 5, 2025
What to do if my Grundig LCD TV remote control is not working?
- S
  Scott HerreraAug 5, 2025
  If the remote control isn't working with your Grundig LCD TV: * Make sure there is a clear line of sight between the remote and the TV. Point the remote directly at the television. * Check and replace the batteries in the remote if needed. * As a last resort, switch off the television at the mains switch for two minutes, then turn it back on.
S
Sharon MartinAug 10, 2025
Why is my Grundig LCD TV showing ghosting or reflections?
- D
  dennis71Aug 10, 2025
  If you're seeing ghosting or reflections on your Grundig LCD TV, consider these solutions: 1. Try automatic or manual tuning/fine tuning the channel. 2. Have your antenna cable or system checked. 3. Increase the color intensity. 4. Select the correct color standard in your TV settings, if available. 5. Try a different channel to rule out issues with the current broadcast.
R
Ronald CarrollAug 14, 2025
What to do if Grundig 47 VLE 9372 BL LCD TV cannot find DMS device?
- D
  douglasmadisonAug 14, 2025
  If your Grundig LCD TV can't find the DMS device, verify these: * Ensure the DMS device is powered on and running. * Check the network settings on your TV and the DMS device to ensure they are properly configured.
R
Ronald MathewsAug 20, 2025
Why is Teletext impaired or absent on my Grundig 47 VLE 9372 BL LCD TV?
- X
  xparkerAug 20, 2025
  If Teletext is not working properly on your Grundig LCD TV: * Try tuning to a different channel. * If the issue persists, try fine-tuning the channel. * Check your antenna to ensure the station signal isn't too weak.
M
Michael FischerAug 25, 2025
How to brighten a dark picture on Grundig LCD TV in PC mode?
- C
  Christopher MacdonaldAug 26, 2025
  If the picture is too dark when using PC mode on your Grundig LCD TV, the picture resolution and refresh rate settings on your PC might be incorrect. Change the settings on the PC, for example, to a 1280 x 768 resolution with a 60 Hz refresh rate.

Summary

GENERAL INFORMATION

Receiving digital channels

Instructions for tuning digital satellite, terrestrial, and cable channels.

CONNECTION AND PREPARATION

Connecting the antenna and power cord

Guide to connecting the antenna and power cord to the TV.

Inserting batteries into the remote control

OVERVIEW

The remote control - Main functions

Description of the primary functions of the TV's remote control.

SETTINGS

Initial set-up and tuning television channels

Guide for the initial setup and automatic channel scanning.

Selecting language, country and operating mode

Steps to select language, country, and operational mode during setup.

Tuning the television channels from satellite (DVB-S)

Instructions for tuning satellite TV channels using easy or advanced setup.

Advanced installation

Tuning terrestrial television channels (DVB-T)

Guide for tuning digital terrestrial TV channels.

Tuning television channels from the cable provider (DVB-C)

Instructions for tuning TV channels via cable provider.

Picture settings

Adjustments for picture quality like brightness, contrast, color.

Sound settings

Options for adjusting volume, balance, sound modes, and night mode.

3 D FUNCTION

Important information about the 3 D function

3 D Settings

Settings for adjusting 3D mode, effects, perspective, and depth.

Adjusting 2 D → 3 D effects

NETWORK INSTALLATION

Network Connection

Introduction to connecting the TV to a wired or wireless network.

Wired network connection

Instructions for establishing a wired network connection.

Wired network setting

Wireless network connection

Introduction to connecting the TV wirelessly to a network.

Wireless network settings

SMART INTER@ACTIVE TV 2.0 FUNCTION

Smart Inter@ctive TV 2.0 Applikationen

Overview of internet applications available on the TV.

GRUNDIG AppLICATION store

Creating a GRUNDIG SMART APPS account

Selecting applications

WebBrowser application

Plugged into Skype

Introduction to making audio and video calls via Skype.

Connecting Skype Camera

Steps to connect the required Skype camera to the TV.

Creating an Skype account

Detailed guide for creating a Skype account directly on the TV.

Making a call with Skype

Instructions for making audio and video calls via Skype.

Making a call with a phone number

The application BABYWATCH

MULTI MEDIA SERVER MODE

Playing the video, music and image files with home network connection

How to play media files from a home network using DLNA.

Selecting the Digital Media Server

Start playback

USB RECORDING

Information on recording and playing television programmes

Guidelines and requirements for recording and playing TV programs.

Settings for USB recording

Options for configuring USB recording settings on the TV.

Safely remove disk

Pausing time shift programmes

How to pause and resume live TV programs using time shift.

Recording programmes

Detailed guide on how to record TV programs directly.

Recording a programme from the channel list

How to record a program by selecting it from the channel list.

Presetting programmes to be recorded... using the electronic TV guide

How to schedule recordings using the electronic TV guide.

... by manual data entry

How to manually enter recording schedules for TV programs.

Playback

How to play back recorded programs from the external data medium.

Selecting a programme from the archive

USB OPERATION

Connecting external data media

How to connect external storage devices (USB drives, HDDs) to the TV.

Removing the external data media

The file browser

DivX VOD

Basic playback functions

General playback controls for media files.

INTERACTIVE PORTAL (HBBTV)

What is HbbTV?

Definition and purpose of the Hybrid Broadcast Broadband TV service.

HbbTV Operation

CONVENIENCE FUNCTIONS

Language settings

Timer functions

Setting sleep timers and auto-on timers for the TV.

Parental control settings

Setting up parental guidance and PIN codes for content access.

Authorising programmes

How to set access levels for age-restricted programs.

Locking menus

Locking keys (Parental lock)

Activating or deactivating the keypad lock for child safety.

Changing the PIN code

Locking television channels

How to lock individual TV channels using a PIN code.

Updating software (OAD) (from satellite, for digital channels only)

Updating software (Online) (from the internet, for digital channels only)

Restoring the television to the default settings

How to reset the TV to factory default settings.

OPERATION USING EXTERNAL DEVICES

DIGI LINK

Introduction to the DIGI LINK (CEC) function for controlling external devices.

Searching for and activating external devices

Connection options

Connecting external devices... with digital audio;video signals

How to connect devices using HDMI for digital signals.

... using the SCART socket (CVBS;RGB signal)

... with an analogue TV signal

Hi-fi System

Connecting the TV to a Hi-fi system or AV receiver for audio output.

Apply the device with HDMI ARC function and activate HDMI ARC

Activating HDMI ARC for audio return channel functionality.

Playing the audio signal via the HiFi system

OPERATION AS A PC MONITOR

Connecting a PC

How to connect a PC to the television for use as a monitor.

Settings for PC mode

Adjusting TV settings for optimal PC display.

OPERATION WITH A COMMON INTERFACE

What is a Common Interface?

Inserting the CA module

Access control for CI module and smart card

How to access Pay-TV channels using a CI module and smart card.

SPECIAL SETTINGS

Searching for digital television channels from a satellite automatically

Guide to automatically scan for new satellite channels.

Searching for digital television channels from a satellite manually

How to manually search for satellite channels using specific parameters.

LNB settings

Configuration of LNB settings for satellite reception.

Settings for motorised antennas (DiSEqC 1.2)

Configuring DiSEqC 1.2 for motorised satellite antenna operation.

DiSEqC 1.2 Settings

Detailed settings for adjusting satellite antenna alignment.

Searching for television channels from the cable provider automatically

How to automatically scan for cable TV channels.

Searching for television channels from the cable provider manually

How to manually search for cable TV channels.

Searching for digital terrestrial TV channels automatically

Guide to automatically scan for digital terrestrial TV channels.

Searching for digital terrestrial TV channels manually

How to manually search for digital terrestrial TV channels.

Tuning analogue television channels

Instructions for tuning analogue TV channels.

Tuning the television channels by entering the channel numbers

Displaying signal information (for digital channels only)

Deactivate and activate HbbTV

INFORMATION

Troubleshooting

A guide to common problems and their solutions.