What to do if the Grundig LCD TV remote control does not work?
If the Grundig LCD TV remote control isn't working, first ensure there are no obstructions between the remote and the TV and that you're pointing the remote directly at the television. Then, check the batteries and replace them if needed. If it still doesn't work, try switching off the television at the mains switch for two minutes.
What to do if Teletext is not working on Grundig LCD TV?
If teletext is impaired or absent on your Grundig LCD TV, the issue might be with the broadcast station, so try switching to a different channel. If that doesn't work, try fine-tuning or selecting a different TV channel that supports teletext. You should also check your antenna, as a weak signal can cause this issue.
General| Screen Size | 47 inches |
|---|---|
| Display Type | LCD |
| Backlight | LED |
| Aspect Ratio | 16:9 |
| Built-in Speakers | Yes |
| Resolution | 1920 x 1080 pixels |
| Viewing Angle | 178° |
| Component Input | Yes |
| Composite Input | Yes |
| Headphone Jack | Yes |
| Standby Power Consumption | 0.5W |
To Next Page